GP:50 | pressure, level & temperature transmitters and transducers | gp50.co.uk

Use our live chat service to speak to an operator directly

All Products

1000 Series General Purpose Sensor - OEM & General Purpose Sensor

1000 Series General Purpose Sensor

OEM & General Purpose Sensor

The 1000 series pressure transducer is designed for the tough and rigorous environments found in general industrial test and measurements or OEM applications. Applications include:

  • Pump control
  • Industrial OEM
  • Pneumatic control
  • Hydraulic systems
  • Automotive 

View product

1102 & 1103 Low Cost - Economic Pressure Sensor

1102 & 1103 Low Cost

Economic Pressure Sensor

The 1102 and 1103 range of sensors have been designed to offer and economic solution to many submersible applications. But at the same time these sensors offer typical accuracy of ±0.25% FS over a wide choice of pressure ranges.

The 1100 series of sensors is offered with a wide range of options that enable it to meet the exacting requirements of your application, which include  

  • Level and Depth
  • Irrigation  
  • Water treatment plants
  • Ground water testing
  • Food and Beverage 

View product

1171 Field Rangeable - Field Rangeable Pressure Sensor

1171 Field Rangeable

Field Rangeable Pressure Sensor

The 1171 is a rugged, small size transmitter designed for use in the worst weather conditions.  The all welded, totally sealed construction means that can be submersible to 100ft  / 30meters

The 1171 features external, hermetically zero, span and calibration controls which are easily adjusted via a magnetically coupled drive system. This unit allows for 5:1 ranging of the transmitter's standard pressure range.

Applications Include

  •  Off shore rigs and pumping platforms
  •  Pipelines and processing
  •  Marine and shipboard applications
  •  Plastic and paper processes 

View product

11XP Explosion Proof - Explosion Proof Pressure Transmitter

11XP Explosion Proof

Explosion Proof Pressure Transmitter

The 11XP, range of pressure transmitters have been designed to offer a rugged, intrinsically safe, explosion proof transmitter for use in hazardous location such Zone2 /Div2 areas. The 11XP design features a factory seal, eliminating the need for a conduit seal, allowing for safer, easier installation. 

View product

120 Down Hole Pressure Transducer - Oil & Gas down hole transducer

120 Down Hole Pressure Transducer

Oil & Gas down hole transducer

The GP:50 model 120 is a down-hole, high pressure, high temperature oil and gas pressure sensor  designed for easy installation in challenging environments  where space is at a premium. 

The 120's compact design is manufactured from highly corrosion resistant materials means it's capable of withstanding high shock and vibration environments 

Applications Include:

  • Oil / Gas exploration and production
  • Geothermal
  • Well head monitoring
  • Coil Tubing 
  • MWD, PWD and LWD tools

View product

17  Industrial Series  - Industrial Grade Flush Transmitter

17 Industrial Series

Industrial Grade Flush Transmitter

The 17 series flush faced pressure or tank level sensors are an ideal solution where media being measured would otherwise clog a standard process connection.  

View product

170/270/370 Series Hammer Union - Hammer Union Pressure Transmitter

170/270/370 Series Hammer Union

Hammer Union Pressure Transmitter

The 170, 270 and 370 Hammer Union pressure transmitters have been designed specifically for use with either WECO 2" 1502 or 2002 wing union fittings.  This makes the 170, 270 and 370 suitable for high pressure applications such as Cementing, Fracturing, Mud Pressure Measurement and Acidizing

View product

170/270/370 WECO Union -  WECO Union Pressure Transmitter

170/270/370 WECO Union

WECO Union Pressure Transmitter

The GP:50 170/270/370QX series pressure transducer is designed for HPHT (high pressure, high temperature) well applications.  Designed to fit the WECO 2 inch, 1502 or 2002 / 2202 or 602 Wing Union fittings, it will work at a continuous process temperature to 177 deg C .

The 170/270/370QX are reliable devices, designed to work in high shock environments such as fracturing, cementing and mud drilling pressure measurement 

View product

18 Sanitary Series  - Sanitary Flush Diaphragm Sensor

18 Sanitary Series

Sanitary Flush Diaphragm Sensor

The 18 series flush diaphragm pressure transmitters are a wet true gauge pressure sensor that does not require a vented cable. This makes this easily cleaned sensor ideal for slurry measurement 

View product

188 Mini Flush Transmitter - Miniature Flush Transmitter

188 Mini Flush Transmitter

Miniature Flush Transmitter

The 188 pressure transmitter has been designed to fit into restricted spaces, yet offer pressure measurement to 10,000psi. The one piece, all welded construction offer a tough, reliable but high performance package. The flush port design eliminates any dead volume, making it ideal for many applications, including;

  •  Adhesive dispensing
  • Paint systems
  • Sludge and slurry pressure
  • Brake pressure and temperature 

View product

216 & 316 Differential Pressure  - Low range, high line pressure sensor

216 & 316 Differential Pressure

Low range, high line pressure sensor

The 216 and 316 family of low range, high line, differential pressure transducers. The compact design  incorporates GP50s own digital correction technology for high accuracy and extended service life.

Typical applications for the 216 &316 include;

  • Automotive test stands
  • Leak decay
  • Laboratory R&D
  • Emissions Management
  • Energy Management

View product

240 & 340IM Series - Flush Face Industrial Pressure Transmitter

240 & 340IM Series

Flush Face Industrial Pressure Transmitter

 The model 40-Im series are a flush mount pressure transmitters designed for use in high viscosity media, especially where more traditional non flush designs can get clogged or damaged.

The 40-IM features a rugged, all welded Inconel design which makes compatible with corrosive media

Applications include ;-

·         Waste water treatment

·         Slurries and Sludge

·         Paints and adhesives

·         Corrosive and high viscosity media

·         Pump suction and discharge lines   

View product

271 & 371 Temp. Transmitter - WECO, Hammer union temp transmitter

271 & 371 Temp. Transmitter

WECO, Hammer union temp transmitter

The 271 and 371 temperature transmitters are designed specifically for use with WECO 2" 1502 or 2" 2002 Wing Union fittings for high pressure / vibration applications. These include

  • OIL & GAS
  • Cementing
  • Fracturing
  • Mud pressure measurement
  • Acidizing

View product

280/380 283/383 Pressure Sensors - Tri-clamp flush sanitary sensors

280/380 283/383 Pressure Sensors

Tri-clamp flush sanitary sensors

GP50's family of 280/380 and 283/383 are tri-clamp pressure sensors designed for a high degree of reliability within the demanding environment of flush and sanitary applications

View product

311-HD & 311-QX Pressure Sensors - Cryogenic and High Temp. Sensors

311-HD & 311-QX Pressure Sensors

Cryogenic and High Temp. Sensors

GP50’s 311-HD and 311-QX pressure sensors designed to offer a reliable,  economic option for your cryogenic or very high temperature pressure measurement applications.

Yet the 311-HD and QX are fully featured with remote mounted electronics, a high 4-20mA or 0-5vDC output, a SST armoured cable jacket with a choice of lengths provides flexible mounting options. 

Also available are optional CANbus, RS485 Modbus, USB or RS232 digital protocols, all adding to the performance of this highly spec’d yet economically priced sensor  

View product

311-M351 Submersible Transmitter - Lift stn and sludge level transmitter

311-M351 Submersible Transmitter

Lift stn and sludge level transmitter

The 311-M351 is a submersible level transducer that is designed for the tough challenges and environmental rigors of water and sewage treatment work. It is a high accuracy device, rated 0.5% FSO RSS. Typical applications include;

  • Raw sewage wet wells
  • Lift station level
  • Process sumps
  • Water tanks and reservoirs 

View product

311Z, I, GI & AI  - Intrinsically Safe Pressure Sensor

311Z, I, GI & AI

Intrinsically Safe Pressure Sensor

The 311Z, I, GI & AI pressure transmitters have been designed to offer a rugged, intrinsically safe transmitter in a compact design. This design allows it to be factory sealed, eliminating the need for a conduit seal.

View product

313L Subersible  - Submersible Level Transmitter

313L Subersible

Submersible Level Transmitter

The 313L is a submersible level sensor that offers accuracy to ±0.1% full scale. This sensor's fully welded stainless steel construction is designed for long term stability accuracy .

The 313L is offered with a wide range of options that enable it to meet the exacting requirements of your application   

View product

313L-NI Pressure Transmitter - Titanium, submersible, level

313L-NI Pressure Transmitter

Titanium, submersible, level

The 313l-NI submersible level transmitter uses an all titanium design to ensure long term stability and reliable performance under the harshest conditions, including corrosive and hazardous chemical applications. The slim design and media resistant construction offer exceptional performance in down well applications that have space constraints and caustic environmental conditions 

Typical Applications include:

  • Deep wells and boreholes
  • Ground water monitoring
  • Reservoirs and dams
  • Rig ballast control
  • Weirs, wells, ponds, reservoir and dam levels

View product

340 Series  - Blender Discharge Pressure Transmitter

340 Series

Blender Discharge Pressure Transmitter

The 340 series of sensors are designed specifically for truck mounted blender discharge pressure applications. The rugged flush face sensor eliminates media plugging and damage , while the 5 x proof pressure eliminates damage from over pressure

View product

340T Series  - Temperature Transmitter

340T Series

Temperature Transmitter

The 340T temperature transmitter is essential where reliable, accurate process temperatures are required. With a large range of temperatures and probe lengths available , the model 340T is adaptable for most temperature applications and processes. It's compact size provides easy installation for on board vehicles used in the oil and gas  industry

Typical Applications include:

  • Oil and Gas
  • Chemical industries
  • Automotive test stands
  • Power generation
  • Medical and laboratory R&D

View product

411 & 411X/P Pressure Sensors - Smart, Rangeable pressure transmitters

411 & 411X/P Pressure Sensors

Smart, Rangeable pressure transmitters

The 411 and 411 X/P sensors are harsh environment sensors designed to solve your worst weather nightmares. This small size sensor features HART communications protocols and microprocessor in a small rugged package. HART communications allows for simpler system, commissioning and start up, while digital compensation provides enhanced accuracy and range-ability  

Applications Include 

  • Offshore rigs and pumping platforms
  • Pipelines and processing
  • Marine and shipboard application
  • Plastics and paper

 

View product

42 Series Vehicle Test Sensor - Vehicle Pressure Sensor/ Transmitter

42 Series Vehicle Test Sensor

Vehicle Pressure Sensor/ Transmitter

The x42 pressure transducer is designed for the tough and rigorous environments found in ground support testing. The X42 range of sensors feature the latest blend of mechanical and circuit technology to offer superior ruggedness, accuracy and fatigue life    

View product

540 Flush Mount - Pressure sensor with CANBus Protocol

540 Flush Mount

Pressure sensor with CANBus Protocol

The 540 is a flush mount pressure transducer that that features CANBus 1939 protocol comms. This offers advantages such as adjustable bit rate, adjustable message output rate, digital shunt and custom message streaming

View product

543 Pressure and Temp Transmitter - Dual Function CANbus Transmitter

543 Pressure and Temp Transmitter

Dual Function CANbus Transmitter

The 543 is a dual function transmitter that offer both pressure and temperature in a single device. It features CANBus 1939 protocol, offering advantages such as adjustable bit rate, adjustable message output rate, digital shunt and custom message streaming

View product

611 & 612 USB Pressure Transducer - Pressure Sensor with USB output

611 & 612 USB Pressure Transducer

Pressure Sensor with USB output

The model 611 & 612 is a family of USB pressure transducers that offer the intuitive, user friendly connection to any PC via a USB port. Digi-Stand, windows compatible data logging software is included to make configuration on any Laptop or PC as quick and easy as possible.  

Pressure values in absolute, gauge, sealed gauge or vacuum formats can be viewed and logged real time with multi drop configuration possible.  There is also the option of continuous output streaming and auto 2 point auto calibration

The 611 & 612 sensors constructed from stainless steel for both the housing and wetted parts, making these robust and reliable transducers suitable for many applications, including:

  • Oil and gas pipeline pressure testing
  • Oil and gas valve pressure testing
  • Laboratory research
  • Portable test stands
  • Hydrostatic and calibration test stands

 

View product

7500 Pressure / Level Sensor - Sub-sea, pressure & level transducer

7500 Pressure / Level Sensor

Sub-sea, pressure & level transducer

The 7500 is a level transducer that been designed for the tough challenges and environmental rigors of oilfield, down hole and deep sea applications. Typical applications include;

  • DSRV and ROV's
  • Oil platform and down hole applications
  • Ocean pump stations

View product

7500-9000 Pressure & Temp Sensor - Sub-Sea Pressure & Temperature

7500-9000 Pressure & Temp Sensor

Sub-Sea Pressure & Temperature

The 7500-9000 Series are combined pressure and temperature transmitters that are designed for the challenging environments of Sub Sea and Oil and Gas industries.

The accuracy of 0.25% FSO, pressure range of 0-20,000 PSIG and capability of being submerged to over 9,000 meters makes the 7500-9000 ideal for applications such as;

  • Depth and level sensing
  • Ocean pump stations
  • Oil platform and down-hole applications 

View product

7540 Sub-sea Pressure Transducer - Sub-Sea,Differential Pressure Sensor

7540 Sub-sea Pressure Transducer

Sub-Sea,Differential Pressure Sensor

The 7540 is a rugged and compact differential pressure sensor that's designed for the rigors of sub-sea use. Durability and performance is enhanced by being manufactured to meet MIL-STD and MIL-Spec standards.

Applications Include:

  • Mini -sub hydraulic systems
  • Submarine propulsion systems
  • Sub-sea oil well head pressure 

View product

7710 Cryogenic Sensor  - Cryogenic Temperature Sensor

7710 Cryogenic Sensor

Cryogenic Temperature Sensor

The model 7710 is a cryogenic temperature sensor of full stainless steel construction, designed to proved a reliable low temperature measurement down to minus 196 deg Celsius (-320 deg F).  

The 7710 features remotely mounted electronics to provide a high level signal output with the choice of 4-20mA; 0-5Vdc or 0-10Vdc. A choice of RS232, RS485 or CAN protocol also help to ensure improved cryogenic measurement accuracy and higher resolution.

Typical applications for the 7710 include;

• Aerospace ground support
• Rocket propulsion systems
• Military and defence
• Fuel test stands
• Cryogenic custody transfer

View product

7720 Cryogenic Sensor  - Pressure Sensor for Cryogenic Enviroments

7720 Cryogenic Sensor

Pressure Sensor for Cryogenic Enviroments

The 7720 Cryogenic pressure transducer is designed to meet the requirements of the harshest test environments while offering high accuracy in a light weight package

Typical Applications include;

  • High vibration and shock environments
  • Manifolds  and propulsion systems
  • Aviation pressure testing
  • Military and defence test enviroments

View product

7730 Cryogenic Dual Sensor - Dual Pressure & Temp Sensor

7730 Cryogenic Dual Sensor

Dual Pressure & Temp Sensor

The 7730 is combined tempreture and pressure transducer is designed to meet the requirements of the harshest Cryrogenic test environments while offering high accuracy in a light weight package

Typical Applications include;

·         High vibration and shock environments

·         Manifolds  and propulsion systems

·         Aviation pressure testing

·         Military and defence test environments

View product

7790 Dual Function Sensor - Hi temperature and pressure sensor

7790 Dual Function Sensor

Hi temperature and pressure sensor

The model 7790 is a dual temperature and pressure sensor of full stainless steel construction. The 7790 is designed to proved a reliable pressure and temperature measurement in extreme or harsh environments

Typical applications for the 7790 include;

• High vibration environments
• Propulsion system manifolds
• Military and defence applications

View product

7850 Sub-sea Temperature Sensor  - Sub-sea & Extreme Temp.Transmitter

7850 Sub-sea Temperature Sensor

Sub-sea & Extreme Temp.Transmitter

The GP50 7850 tempreature transmitter is a compact, rugged unit. It's corrosion resistant  design is tailor made for the demading enviroments of deep water oil and gas or marine exploration.   

Applications include; 

  • Military and commercial ROV
  • Subsea Oil and Gas
  • Marine and exploration 

View product

7880 dual function sensor - Pressure and Temperature Sensor

7880 dual function sensor

Pressure and Temperature Sensor

The model 7880 is a temperature and pressure sensor designed to meet the rigors of space propulsion and aviation pressure testing. The 7880 is designed to proved reliable temperature and pressure measurement in extreme or harsh environments

Typical applications for the 7880 include;

• High vibration environments
• Propulsion system manifolds
• Military and defence application
• Extreme and harsh environments

View product

7900 Lightweight Pressure Sensor - Flow In-Flight pressure transducer

7900 Lightweight Pressure Sensor

Flow In-Flight pressure transducer

The 7900 is a light weight flow through pressure sensor designed for aviation in flight pressure testing or the testing of space propulsion systems

Typical applications for the 7900 include;

• Mini propulsion systems
• Satellite propulsion systems
• Launch vehicles. 
• Life support systems

View product

7901 Lightweight Pressure Sensor - Space Qualified, In-Flow, Low Noise

7901 Lightweight Pressure Sensor

Space Qualified, In-Flow, Low Noise

The 7901 is a light weight flow through pressure sensor designed for aviation in flight pressure testing or the testing of space propulsion systems

Typical applications for the 7901 include;

• Mini propulsion systems
• Satellite propulsion systems
• Launch vehicles. 
• Life support systems

View product

8200 Digitally Corrected Pressure  - Flight Qualified, High Level Sensor

8200 Digitally Corrected Pressure

Flight Qualified, High Level Sensor

The 8200 is a flight qualified high level, pressure sensor designed for aviation testing applications. This transducer is digitally corrected to ensure the highest possible accuracy

Typical applications for the 8200 include;

• Commercial and defence satellites
• Engine testing
• Launch vehicles. 
• Aircraft systems and Avionics

View product

8300 Differential Pressure - Flight Qualified, Digitally Corrected

8300 Differential Pressure

Flight Qualified, Digitally Corrected

The 8300 is a flight qualified differential, pressure sensor designed for aviation testing applications. This transducer is digitally corrected to ensure the highest possible accuracy

Typical applications for the 8300 include;

• Space qualified flight hardware requirements
• Satellites
• Launch vehicles. 
• Rugged field test applications  

View product

8500 Digital Pressure Sensor - Digitally Corrected Submersible

8500 Digital Pressure Sensor

Digitally Corrected Submersible

The 8500 is a digitally corrected, submersible pressure transducer that been designed for the tough challenges and environmental rigors of oilfield, down hole and deep sea applications. It is a high accuracy device, rated 0.08% RSS and is designed for over 1 million continuous cycles. Typical applications include;

  • DSRV and ROV's
  • Depth / level sensing
  • Oil platform and down hole applications
  • Ocean pump stations

View product

9320 TEDS Indicator - Hand Held Indicator

9320 TEDS Indicator

Hand Held Indicator

 

The 9320 Portable Strain Display Load Cell/Force transducer readout is a microprocessor based portable instrument designed to interface with any full bridge sensor with an output sensitivity of up to 50mV/V.  Bridge resistances from 85W upwards can be used with the 9320.

The 9320 is TEDS plug and play compliant to IEEE 1451.4

View product

DFI-05 Indicator - DFI-05 MK2 Panel Mount Digital Indicator in PCC1 enclosure

DFI-05 Indicator

DFI-05 MK2 Panel Mount Digital Indicator in PCC1 enclosure

The DFI-05 is a panel mount indicator available in current or voltage versions and designed for use with load cells, torque transducer and pressure sensors. This enables it's use in force measurement,  weighing, torque or pressure  measurement applications.

Its dual slope 16 bit ADC performs 10 conversions each second with a resolution of 1 part in 63,000 and a maximum sensitivity of 1µV. Load cells can be wired in either 4 or 6 wire configuration and up to 4x 350R units can be connected to each indicator for platform or vessel weight displays. Standard features include Adjustable Filters, Automatic Zero Drift Compensation, Peak and Valley Detection, Display Filter, Last Digit Roundup, In-flight compensation and multiple point calibration with the Lineariser feature (maximum 10 points). 

View product

GPIDP Smart Transducer/Transmitter - Smart Differential Sensor/Transmitter

GPIDP Smart Transducer/Transmitter

Smart Differential Sensor/Transmitter

The GPIDP is a smart differential pressure transducer/ transmitter featuring an easy to read LCD display with easy adjustment via push buttons. The GPIDP is a high accuracy sensor designed for the harsh environment typical of water treatment and chemical processing plants.

Applications include;

  • Chemical processing
  • Sanitary tank level  
  • Water treatment plants

View product

iDucer Wireless Transmitter - Wireless Pressure Transmitter

iDucer Wireless Transmitter

Wireless Pressure Transmitter

The GP:50 iDucer is an innovative pressure transmitter that makes pressure measurement in difficult to reach or remote locations possible where conventional , wired sensors would be impractical.

Its Bluetooth 4.0 wireless technology means that data can be received, viewed and saved by most Apple, Android or Windows phone, tablet or PC devices via the supplied application software. The built in power save mode helps to ensure along battery life with a wireless range of up to 100m, line of sight.

Construction features full stainless steel wetted parts and housing along with a 1/4" NPT male process connection. Other connections are available on request

Applications include:

  • Automotive
  • HVAC
  • Irrigation
  • Marine 

View product

LD1001 Display - Plug on Transmitter Display

LD1001 Display

Plug on Transmitter Display

The LD1001 is a plug on, universal local display with an adjustable set point. The LD1001 can be used with any GP50 4-20mA, two wire transmitter. The removable front cover protects two programming buttons which are used to input the required settings for parameters such as zero, scale, decimal point, damping and switch point.   

View product

M/V/C Spike Series  - Pressure spike transducers

M/V/C Spike Series

Pressure spike transducers

The Spike series is a family of pressure transducers designed to withstand high amplitude, high frequency spike that commonly occur in hydraulic pressure sensing applications.

Typical applications include:

 

  • Die casting
  • Injection moulding
  • Stamping presses
  • Hydraulic test stands
  • Compressors and pumps 

View product

Model 11 Series Pressure Sensors - Industrial Grade Pressure Transducer

Model 11 Series Pressure Sensors

Industrial Grade Pressure Transducer

The 111 211 /311  range of pressure transducer is designed for the tough and rigorous industrial environments.  The 111/ 211/ 311  series is available in 3 sizes and can be customized to meet you exact requirements  

View product

Model 12 Series Pressure Sensor - Ultra High Pressure Transducers

Model 12 Series Pressure Sensor

Ultra High Pressure Transducers

The 112/212/312 range of ultra high pressure transducers are designed for  tough and rigorous industrial applications where pressures up to 150,000psi are experienced .  

View product

Model 136, 236, 336 - Compact, differential pressure sensor

Model 136, 236, 336

Compact, differential pressure sensor

The 136/236/336 family is a range of differential pressure sensors that have been designed with high accuracy and robust performance in mind

The 136/236/336 is capable of measuring differential pressure as low as 20” WCD with line pressure as high as 1,000PSID. This compact transducer is also offered with a accuracy options up to ±0.05%FSO. There is also the choice of digital outputs and electrical connections, please contact us for details.

Applications include;-

  •  Transport and storage of LNG gas
  • Automotive test stands
  • Aircraft engine test stands
  • Flow and filtration measurements
  • Tank level
  • Leak Testing   

 

View product

Model 14 Series DP Sensor - Ultra High Differential Pressure Sensor

Model 14 Series DP Sensor

Ultra High Differential Pressure Sensor

The X14 range of differential pressure transducers are designed for the tough and rigorous industrial environments where pressure to 20,000psi are experienced. The X14 series is available with a choice of outputs with many options to meet you exact requirements  

View product

Model 15 Series  - Differential Pressure Transmitter

Model 15 Series

Differential Pressure Transmitter

The 15 series are a range of rugged, small size differential pressure transmitter designed for use in many different environments, including hazardous and explosion risk areas.

View product

Model 313G Level Sensor - PVC Submersible Level Transmitter

Model 313G Level Sensor

PVC Submersible Level Transmitter

The 313G is a submersible level transmitter that features a flush ceramic sensor. This design helps minimize clean up time due to reducing the build-up of contaminants such as grease and bio-solid materials.

The 313G sensor constructed from a chemical resistant PVC that provides continuing performance and stability under the aggressive conditions associated with waste water and other aggressive liquid media applications. 

Applications include;

·         Submersible pump lift station level monitoring

·         Water tanks and reservoirs

·         Processing sumps

·         Waste water level monitoring

·         Water recycling 

View product

Model 541 CANbus Pressure Sensor - Hi-Accuracy CANbus pressure sensor

Model 541 CANbus Pressure Sensor

Hi-Accuracy CANbus pressure sensor

The model 541 is GP50’s most accurate CANbus pressure sensor yet!   The 541 has been designed specifically for test stand applications. 

The CAN Bus protocol provides high resolution, reduced noise and improved thermal performance. The all welded, stainless steel construction offers easy installation into the most confined spaces

Applications Include;

  • Dynamometer testing
  • Transmission testing
  • Brake testing
  • Hydraulic and pneumatic valve testing
  • Jet engine testing
  • Emission test stands  

View product

Model 7100 Pressure Transducer - Flight Qualified, Low Level Sensor

Model 7100 Pressure Transducer

Flight Qualified, Low Level Sensor

 The 7100 pressure transducer is designed for the tough and rigorous environments of space propulsion and aerospace pressure testing . Applications include:

  • Commercial and defence satellites
  • Ground and engine testing
  • Aircraft systems and avionics 

View product

Model 7200 Pressure Transducer - Flight Qualified, High Level Sensor

Model 7200 Pressure Transducer

Flight Qualified, High Level Sensor

The 7200 pressure transducer is designed for the tough and rigorous environments of space propulsion and aerospace pressure testing.

Applications include:

  • Commercial and defence satellites
  • Ground and engine testing
  • Aircraft systems and avionics 

 

 

View product

Model 7201 Pressure Transducer - High Level, Low Noise Transducer

Model 7201 Pressure Transducer

High Level, Low Noise Transducer

The 7201 pressure transducer is designed for the tough and rigorous environments of space propulsion and aerospace pressure testing  

Applications include:

  • Commercial and defence satellites

View product

Model 7300 Pressure Transducer - Flight Qualified, Differential Pressure

Model 7300 Pressure Transducer

Flight Qualified, Differential Pressure

The 7300 pressure transducer is designed for the tough and rigorous environments of space propulsion and aerospace pressure testing  

Applications include:

  • Commercial and defence satellites
  • Launch vehicles
  • On board military or comercial vehicles

View product

Model 7400 Differential Pressure - Aerospace-differential-pressure

Model 7400 Differential Pressure

Aerospace-differential-pressure

The 7400 is a differential pressure transducer that been designed for the tough challenges and environmental rigors of aerospace pressure and space propulsion testing . Typical applications include;

  • Ground support systems
  • Aircraft systems and avionics
  • Ground and engine testing

View product

Model 7770 Temperature Sensor - Extreme High Temp Transducer

Model 7770 Temperature Sensor

Extreme High Temp Transducer

The model 7770 is a temperature transducer that has been designed for the extreme temperatures experienced during the testing of space propulsion systems and aviation pressure testing.  Manufactured to meet the tough standards demanded by MIL-STD-810 for shock and vibration testing, this is a sensor for the harshest environments.

Typical applications include;

  • High vibration environments
  • Extreme or harsh test conditions
  • Manifolds and propulsion systems
  • Military and defence applications

View product

Model 7780 Hi-Temp Pressure   - Pressure Sensor for Hi-temp Enviroments

Model 7780 Hi-Temp Pressure

Pressure Sensor for Hi-temp Enviroments

The model 7780 is a pressure transducer that has been designed for the high temperatures experienced during the testing of space propulsion systems and aviation pressure testing.  Manufactured to meet the tough standards demanded by MIL-STD-810 for shock and vibration testing, this is a sensor for the harshest environments.

Typical applications include;

  •  High vibration environments
  • Extreme or harsh test conditions
  • Manifolds and propulsion systems
  • Military and defence applications

View product

Model 7800 Temp Sensor - Temperature Transducer

Model 7800 Temp Sensor

Temperature Transducer

he model 7800 is a temperature sensor designed to meet the rigors of space propulsion and aviation pressure testing. The 7800 is designed to proved reliable temperature measurement in extreme or harsh environments

Typical applications for the 7800 include;

• High vibration environments
• Propulsion system manifolds
• Military and defence application
• Extreme and harsh environments

View product

Models 241/341 Hi-Accuracy Sensors - High Accuracy Pressure Transducer

Models 241/341 Hi-Accuracy Sensors

High Accuracy Pressure Transducer

The 241 / 341 series are GP50's most accurate pressure sensor to date and are designed specifically for test stand applications. The all welded, compact design is designed to provide easier installation in tight spaces.

Applications include;

  • Transmission testing
  • Jet engine testing
  • Dynamometers
  • Hydraulic  & pneumatic valve systems
  • Brake testing

View product

Random Product

Model 7200 Pressure Transducer
Model 7200 Pressure Transducer
Flight Qualified, High Level Sensor

The 7200 pressure transducer is designed for the tough and rigorous environments of space propulsion and aerospace pressure testing.

View product

Search by model

Download our catalogue

Receive product updates, news and information.

Spam test: 4 + 9 =